BMW ICOM

There have customers have issues use BMW ICOM Next : I have bmw next when i plugge it in, system led started flashing red. I tried re-flashing Firmware and configure user settings but nothing changed still led flashing red. The problem is that the problem with the processor and the algorithm for writing errors in the firmware from the old icom. How to fix it ? You can remove the error by connecting a three-wire fan or a pulse generator with a frequency of 400 Hz. For normal operation it is necessary to set cool the CPU You need to buy a small fan with three wires and solder it. On top of the processor i will put some thermal paste with heatsink also. Question: You know which of this 4 hole is for: Ground (GND), Live wire (VCC 5V) and Third Wire for fan control ? There are 4 holes and 3 of them have trails that goes to the board. Connection of a fan or generator to 400Hz  If you want to learn more about BMW diagnostic tool , welcome to contact with us: Service@autonum...

  Solutions for issue: ICOM fimware is too new to work with ista-p. I have 66.2 installed and the newest icom next firmware. There is a window showing current Firmware 31503 and the supposed firmware 31500. is there a workaround? Error message: Es befinden sich im Werkstattnetz ICOMs, die eine ungultige Firmware aufweisen. Die autgefuhrten ICOMs sind derzeit fur eine Programmierung nicht verfugbar. Bitte wechseln Sie in ISTA und fuhren ein ICOM Firmware Update durch. Translated in English: There are ICOMs in the workshop network that have invalid firmware. The listed ICOMs are currently not available for programming. Please switch to ISTA and carry out an ICOM firmware update. ICOM Next Firmware is too new to work with ISTA-P First solution: override the firmware check Try this: [HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432Node\BMWGroup\ISPI\Rheingold] “Icom.Package.Version”=”00-00-00” “Icom.Package.Version.Compatible”=”00-00-00” “IcomNext.Package.Version”=”00-00-00” “Ic...